Indoor/Wooden Barn Installation

Getting Started

You will need the following tools for easy installation:

  • Shovel and dirt rake for leveling
  • Power drill
  • Utility knife

Step 1: Prep Stall Area

We recommend you create a firm base of crushed rock, limestone or road base (e.g. decomposed granite). If necessary dig a leach pit in the desired area, then fill it with gravel and level out.

Step 2: Stall Skins placement

If you have wooden walls in your stall, simply stretch out your stall skin, run excess fabric up the wall and attach directly to the wall with molding and screws. (Provided). Lay fabric out rough/shiny side up, fluffy side down.

Using a power drill place screws on an angle and screw molding through the material and into the wooden frame. Screws should be placed at an angle to keep the moulding tight. To secure Stall Skin in doorway place 2x4 treated lumber across the threshold and attach molding to lumber with screws provided.

Step 3: Trim

Remove any excess material with a razor blade or utility knife.

Step 4: Install Ample Bedding

Stall Skins were designed to be used with ample bedding – 6-8 inches. Remember, urine is passing through, so you wont be throwing out much bedding. Some situations may require less bedding (eg. horse is only in at night, horse has outside run, spending less time in stall, etc.) To guarantee the long life of your Stall Skin always use bedding.